*MATERIAL-ISO |
 
|
*MATERIAL-ISO |
|
To specify material properties to be used in ISO code checking.
Refer to Code Checking for further information on this feature.
A block of two lines defining the material name and its associated properties. The block may be repeated as often as necessary to define all the required materials.
NAME=Material Name
Rt05, Rm, Temperature, [A5], Young’s Modulus, Tc, Mc, Pec[, Poisson’s Ratio]
A5 and Poisson’s Ratio default to 14% and 0.3 respectively.
Input: |
Description |
Material Name: |
The name of the material. |
Rt05: |
Specified minimum yield strength for 0.5% total elongation at room temperature. |
Rm: |
Specified minimum ultimate tensile strength at room temperature. |
Temperature: |
Elevated temperature. |
A5: |
Percentage minimum elongation after fracture. This value defaults to 14% if not specified. |
Young’s Modulus: |
Young’s modulus for the material. |
Tc |
Single load ultimate tension capacity. |
Mc |
Single load ultimate bending capacity. |
Pec |
Single load ultimate pressure capacity. |
Poisson’s Ratio: |
Poisson’s ratio for the material. This value defaults to 0.3 if not specified. |