<< Click to Display Table of Contents >> Navigation:  Flexcom > Theory > Postprocessing >
Code Checking

Overview

Flexcom allows you to check analysis results against specific design codes/procedures. The codes currently supported are as follows:

•DNV-OS-F101 (Submarine Pipeline Systems), October 2013

•DNV-OS-F201 (Dynamic Risers), October 2010

•API-STD-2RD (Dynamic Risers for Floating Production Systems), September 2013

•ISO-13628-7 (Completion/workover riser systems), November 2005

Further Information

Further information on this topic is contained in the following sections:

•Inputs

•Operation

•Output

Relevant Keywords

•Numerous keywords are contained in the $CODE CHECKING section, which allows you to check analysis results against specific design codes.

If you would like to see an example of how these keywords are used in practice, refer to K02 - Worked Example - Complex.