<< Click to Display Table of Contents >> Navigation:  Flexcom > Installation > Network Licensing > NetHASP Hardware Dongle >
NetHASP Monitor

An optional module, which you may find useful as a user of NetHASP Licensing, is the Aladdin NetHASP Monitor. This software allows you to browse all the NetHASP hardware dongles on your network (not just Wood ones). You may then see how many licences are currently available for any particular product and which machines currently have product licences issued to them.

You can download the software and install it by running aksmon32_setup.exe and following the on-screen instructions. A shortcut to the program will then appear in the Windows Start Menu, as shown below.

AKS Monitor Shortcut

When you run the software you will see a window like the one below which illustrates an example session.

AKS Monitor

In the bar on left-hand-side of the program, open the NetHASP LM folder. In this example there is only one entry here, for the server called SRV_01, which we select. You should choose the entry which corresponds to the server your Flexcom network dongle is attached to.

Under the server entry, it is possible that there may be several dongles listed. However, normally there will be just one. If there is more than one, you will have to ask your system department for assistance in identifying which is the Flexcom dongle. Here there is only one entry, HASP #1, and we select that.

On the right-hand-side of the program, the information for this dongle is shown. We can see that only Program 1 (Flexcom) is listed and that all its licences (2) are allocated. These licences are currently in use at the computers called DAVIDM and MICHAELW. See the table below for a full list of Wood program numbers.

It is worth noting that other programs for which you are licensed, if unlisted, have, by implication, all their licences available.

Network Licensing Program Numbers